Payment Processing
You are here:Home > Sewing Supplies > Seam Rippers & Sewing Tools
Sort By:
Page of 1
Small Seam Ripper Wood Handle Seam Ripper Loop Turner
Our Price: $1.00
Our Price: $1.00
Our Price: $1.50
Small Seam Ripper Wood Handle Seam Ripper Loop Turner
2-1/2" overall lengthClear plastic capRidges on cap prevent rollingCutlery steel , long lasting sharpnessPlastic ball on short finger for safety 5-1/2" overall length. Sure-grip texture handle. Clear plastic cap. Cutlery steel  long lasting sharpness. Plastic ball on short finger for safety Nickel Plated
Blue Handle Seam Ripper DRITZ D26615 Knit Picker DRITZ D706 Ezy-Pull Bodkin
Our Price: $1.50
Our Price: $1.75
Our Price: $1.75
Blue Handle Seam Ripper DRITZ D26615 Knit Picker DRITZ D706 Ezy-Pull Bodkin
5-1/2" overall length. Clear plastic cap. Ridges on cap prevent rolling. Cutlery steel  long lasting sharpness. Plastic ball on short finger for safety Fixes snags on knits and wovens.Instructions:With latch open, gently push Knit Picker from wrong to right side of fabric. Pick up snag, close latch and pull to wrong side of fabric. For easy insertion of elastics and cording. Instructions:Insert elastic into waistband and sleeve casings. Draw cording through tubing and casings. Weave ribbon and trims. Slide ring down toward loop to open bodkin. Insert elastic or cording between tweezers teeth. Slide ring back toward teeth to tighten bodkin. Slip bodkin into casing to insert elastic or cording. TIP - Round corners of elastic to help it slide through casing easier.
DRITZ D633 Button Gauge & Point Turner DRITZ D618 Snag Nab-It COLLINS C88 Point Turner
Our Price: $1.75
Our Price: $1.95
Our Price: $2.50
DRITZ  D633 Button Gauge & Point Turner DRITZ D618 Snag Nab-It COLLINS C88 Point Turner
For making thread shanks. For turning points.Instructions:To Attach Buttons - Sew button loosely, one time. Place gauge between fabric and button, slipping thread into slot. Use slot on pointed end for medium weight fabrics and slot on flat end for heavy weight fabrics. Sew button several times. Remove gauge and bring thread up between button and fabric. Wind thread firmly around stitches under button. Bring thread to back and secure. To Turn Points of Collars, Lapels, Cuff, Pockets & Belts: Stitch, trim and grade seam allowances. Turn to right side, inset pointed end into corner and gently push out corner. Repairs snags in knits and wovensInstructions:Insert point into center of snag. Push or pull tool completely through fabric. Gently stretch fabric to realign fibers. White plastic. Use to turn points in collars, lapels, pockets, etc. Use pointed end to gently push out corners and also to remove basting stitches. The curved end is used to crease seams.Instructions:Point Turner& Seam Presser Use pointed end to:  Turn collars, lapels, and pockets for wearable art. Turn pieces for dimensional applique or dollmaking. Guide fabric while machine stitching. Use curved end to:  "Finger" press seams when hand or machine foundation piecing.  Temporarily mark fabric with a crease
COLLINS C3150 Bamboo Point Turner & Creaser Shirt Collar Buttoner DRITZ D783 Ball Point Bodkin
Our Price: $2.95
Our Price: $3.00
Our Price: $3.25
COLLINS C3150 Bamboo Point Turner & Creaser Shirt Collar Buttoner DRITZ D783 Ball Point Bodkin
Polished bamboo. Use round end to hand press seams or to mark fabric with a crease. Pointed end used for turning points on wearables. Great for foundation piecing quilt blocks. Prevents messing of shirts during pressing operationsComplete with large comfortably shaped wooden handle and spring steel tip Turn bias tubing, insert elastic into casings, weave ribbon.Instructions:BIAS TUBING - Insert ball point of bodkin in closed end of tubing. Push bodkin through center of tubing, gradually turning tubing to inside. Remove bodkin after tube is completely turned. ELASTIC - Insert elastic into eye of bodkin. Slide bodkin (ball point end first) through casing, stitch ends of elastic to secure. TIP - Pin loose end of elastic to avoid pulling through casing. RIBBON WEAVING - Insert ribbon into eye of bodkin. Use ball point to weave ribbon through trim or eyelets.
DRITZ D792 Clip 'N Turn CLOVER CN463 Seam Ripper CLOVER CN482W Seam Ripper
Our Price: $3.25
Our Price: $3.50
Our Price: $3.75
DRITZ D792 Clip 'N Turn CLOVER CN463 Seam Ripper CLOVER CN482W Seam Ripper
Small Clip 'N Turn for 3/8" to 1" fabric tubes. Large Clip 'N Turn for 3/4" or larger fabric tubes. Great for delicate or slippery fabrics.

Instructions:
1.Stitch fabric tube, leaving both ends opened, trim seams. 2.Insert pointed end of Clip 'N Turn (logo side up) into end of fabric tube(A). Bend turner slightly to allow clip to slide over top of fabric. 3.Slide fabric onto Clip 'N Turn until end is at bottom of clip. Press clip down until it locks. 4.Slowly fold fabric tube down over clip(B). Once tube is over clip, push all of the fabric tube onto Clip 'N Turn, gathering as you go. TIP -It is easier to turn tube if all of the fabric is gathered onto the turner. 5.Hold pointed end of Clip 'N Turn and pull gathered fabric tube off turner(C). 6.To remove the Clip 'N Turn, push clip from back to release. Push turner back into tube slightly to release fabric from clip. Use turner end to push out remainder of fabric tube. To insert cording in tube, thread cording through eye in Clip 'N Turn before turning fabric tube(D). For thick cording, turn fabric tube first. Tape or tie string around cording end and secure to clip on Clip 'N Turn(E). Thread through fabric tube.
The small ball on the point will prevent damaging materials when used. Ripping out seams, basting threads, cutting thread under buttons.
CLOVER CN485W Straight Awl DRITZ Curved Blade Seam Ripper CLOVER Wide Bodkin
Our Price: $4.75
Our Price: $4.95
Our Price: $5.95
CLOVER CN485W Straight Awl DRITZ Curved Blade Seam Ripper CLOVER Wide Bodkin
Used in piercing even sized small holes. Remove stitching quickly and easily. Large soft grip handle with thumb hold. Has protective cover.

Instructions:
Extra sharp blade cuts through unwanted stitches easily (A). Thin blade slides under stitches for quick cutting (B). Smoothly cuts through serger stitches (C). CAUTION - Sharp point! Keep away from children. Always replace protective cover when not in use. Use care when removing and replacing the protective cover.
Great use for braiding wide tapes such as bias tape loops or ribbons. Also convenient when weaving strips of fabric or cords for meshwork.
U.S. Blades Single Edge #9 Razor Blades COLLINS C3168 Bamboo Stiletto CLOVER CN486W Tapered Awl
Our Price: $6.95
Our Price: $6.95
Our Price: $7.00
U.S. Blades Single Edge #9 Razor Blades COLLINS C3168 Bamboo Stiletto CLOVER CN486W Tapered Awl
.009 100 pieces. All single edge blades supplied with steel backs. MADE IN USA. This lightweight tool becomes an extension of your hand when sewing. Try it with excellent results for many uses. Keep this versatile tool handy for many other crafts and hobbies.
Instructions:
Keep fabric from shifting when sewing ends of seams. Grab and adjust straying fabric with sharp tip. "Flatten" fabric when sewing over seams. Guide and match curved seams. Turn under and press edges of appliques. Position decorative trims while sewing in place. Ease ruffles and gathers. Turn sewn fabric pieces to create smooth curves and crisp points.
Very useful in punching holes in leather and fabrics. Pulling out corners and widening out Spaces.
5 1/2 Inch Scissor Type Clamping Plier DRITZ D796 Quick Turn CLOVER CN484W Button Hole Cutter
Our Price: $8.00
Our Price: $8.00
Our Price: $9.25
5 1/2 Inch Scissor Type Clamping Plier DRITZ D796 Quick Turn CLOVER CN484W Button Hole Cutter
5-1/2" overall lengthForged stainless steel. Ribbed pickup points and locking clamp securely grips whatever is held Quick Turn - 3/16" cylinder for 3/8" to 5/8" fabric tubes - 3/8" cylinder for 3/4" to 1" fabric tubes - 1/2" cylinder for 1" or large fabric tubes.

Instructions:
1.Stitch fabric tube, trim seams. 2.Select appropriate size cylinder. Slide cylinder into fabric tube until it is at sewn end (A). 3.With round end of corresponding rod(either end of metal rod) push fabric end into the cylinder while sliding fabric tube over cylinder. TIP - If tube will be pressed flat, spread seam allowances open as tube slides into cylinder. Continue until turned tube end comes out of the cylinder (B). TIP - It may be necessary to gather up fabric tube on cylinder to see turned end. 4.Pull on fabric end until entire tube comes out of the cylinder (C). Rod will remain in the fabric tube. 5.Use rod to push out corners. If necessary, turn around rod and use pointed end in corners. Remove rod when finished. For opened end tubes, slide cylinder to about 1" from end of fabric tube. Fold fabric end over cylinder and continue with above instructions. Contains sharp tools. Keep out of reach of children.
The sharpend chisel edge will cut any width opening when placed over block of wood and pounded gently.
CLOVER CN876 Ball Point Awl DRITZ D27081-6 Start-To-Sew Kit
Our Price: $9.25
Our Price: $12.50
CLOVER CN876 Ball Point Awl DRITZ D27081-6 Start-To-Sew Kit
This ball point sewing awl can make a hole by stretching the weave of a fabric without thread breakage. It can store weave without damage to the cloth. Contains-Tracing Paper, Tracing Wheel, Tomato Pin Cushion, 60" Tape Measure, Needle Threader, Marking Pencil, Sewing Gauge, Hand Needles, Straight Pins, 7" Bent Scissors, Seam Ripper, and Thimble. Reusable Storage Box.